This article covers some of the SAS Statistical Business Analyst certification questions with detailed answers. This certification covers some of the most widely used statistical techniques such as ANOVA, linear and logistic regression.

Which SAS program will divide the original data set into 60% training and 40% validation data sets, stratified by county?

Stratified Sampling helps to keep the initial ratio of events to non-events in both the training and validation data sets. It is important in the case of rare-event model. In this case, we are keeping initial ratio of

In order to perform honest assessment on a predictive model, which is an acceptable division between training, validation, and testing data?

A. Training: 50% Validation: 0% Testing: 50%

B. Training: 100% Validation: 0% Testing: 0%

C. Training: 0% Validation: 100% Testing: 0%

D. Training: 50% Validation: 50% Testing: 0%

A marketing campaign will send brochures describing an expensive product to a set of customers.

The cost for mailing and production per customer is $50. The company makes $500 revenue for each sale. What is the profit matrix for a typical person in the population?

What is a drawback to performing data cleansing (imputation, transformations, etc.) on raw data

prior to partitioning the data for honest assessment as opposed to performing the data cleansing

after partitioning the data?

Which of the following is an assumption of ANOVA?

A. No correlation between any one observation with another.

B. No correlation between independent and dependent variable

C. No correlation between independent variables

D. High correlation between any one observation with another.

You have 50 observations in ANOVA and you calculate the residuals. What will they sum to?

An analyst has a sufficient volume of data to perform a 3-way partition of the data into training,

validation, and test sets to perform honest assessment during the model building process.

Assume a $10 cost for soliciting a non-responder and a $200 profit for soliciting a responder. The logistic regression model gives a probability score named P_R on a SAS data set called VALID. The VALID data set contains the responder variable Purch, a 1/0 variable coded as 1 for responder. Customers will be solicited when their probability score is more than 0.05.

A. Option A

B. Option B

C. Option C

D. Option D

Question 15

How c statistics is calculated :

A. percent concordant + (1.5* percent tied)

B. percent concordant + (0.5 * percent tied)

C. percent discordant + (0.5 * percent tied)

D. percent discordant + (1.5* percent tied)

Percent Concordant 82.3

Percent Discordant 17.5

Percent Tied 0.2

c statistics 0.824 =(82.3/100) + (0.5 * (0.2/100))

To crack the exam, candidates should prepare the following topics. The weightage assigned to each topic is mentioned below :

- Analysis of Variance (ANOVA)
**- 10%** - Linear Regression -
**20%** - Logistic Regression -
**25%** - Preparing Inputs for Predictive Models -
**20%** - Measuring Model Performance -
**25%**

**There would be 60 multiple-choice questions a candidate has to answer in 2 hours. A candidate must achieve a minimum 68% marks to pass the exam**

**Question 1**

Which of the following

**two**sampling methods are acceptable while splitting data into multiple samples - training, validation and test samples?
A. Simple random sampling without replacement

B. Simple random sampling with replacement

C. Stratified random sampling without replacement

D. Sequential random sampling with replacement

**Answer :**A, C

**Explanation :**When we split our data into 3 parts - training, validation and test, we perform

**sampling without replacement.**It means a row can be selected only one time which would either move to training, validation or test sample. In other words, same row can never be found in more than one sample. The opposite of this is

**sampling with replacement**. Why not sampling with replacement? If we perform sampling with replacement, we would not be able to assess model performance correctly because same data points that were used to train model exists in validation or test datasets. The explanation of

**Stratified Sampling**is provided in the next question.

**Question 2**

**Answer : C**

**Explanation :**It is required to sort the variable you want to use to stratify sample before running

**PROC SURVEYSELECT**.

Stratified Sampling helps to keep the initial ratio of events to non-events in both the training and validation data sets. It is important in the case of rare-event model. In this case, we are keeping initial ratio of

**country variable**in

**both the training and validation sample.**

**Question 3**

A. Training: 50% Validation: 0% Testing: 50%

B. Training: 100% Validation: 0% Testing: 0%

C. Training: 0% Validation: 100% Testing: 0%

D. Training: 50% Validation: 50% Testing: 0%

**Answer : D**

**Explanation :**There is no fixed optimal splitting rule. Some researchers use splitting rule - 70% training and 30% validation. Some use 60% training-20% validation -20% test. It is important to note that 20 to 50% of data should be used as a validation set in order to measure model performance.

**Question 4**

The cost for mailing and production per customer is $50. The company makes $500 revenue for each sale. What is the profit matrix for a typical person in the population?

Profit Matrix |

**Answer : C**

**Explanation :**It is 450 because $500 revenue was generated and $50 mailing cost was incurred when purchase was made and mail was sent. So, profit = 500 - 50 =450. Profit matrix is used to choose optimal predicted probability cutoff. It is more used rather than sensitivity or specificity to decide the cutoff. The optimal cutoff maximizes the total expected profit.

**Question 5**

prior to partitioning the data for honest assessment as opposed to performing the data cleansing

after partitioning the data?

A. It violates assumptions of the model.

B. It requires extra computational effort and time.

C. It omits the training (and test) data sets from the benefits of the cleansing methods.

D. There is no ability to compare the effectiveness of different cleansing methods.

B. It requires extra computational effort and time.

C. It omits the training (and test) data sets from the benefits of the cleansing methods.

D. There is no ability to compare the effectiveness of different cleansing methods.

**Answer : D**

**Explanation :**If we perform data cleaning before splitting data into training and validation datasets, we would not be able to compare models based on different imputations / transformations methods.

**Question 6**

ROC Curve |

As you move along the ROC curve, what changes?

A. The priors in the population

B. The true negative rate in the population

C. The proportion of events in the training data

D. The probability cutoff for scoring

**Answer: D**

**Explanation:**As you move along the ROC curve, you get more true positive (Sensitivity) but also more false positive (1-Specificity). It also changes the probability cutoff for scoring as the idea is to maximize the difference between True Positive and False Positive.

**Question 7**

How multicollinearity can affect the regression model?

A. Inflate Standard Error of Estimates

B. Deflate Standard Error of Estimates

C Does not affect the model

D Help interpreting Estimates

**Answer : A**

**Explanation :**Multicollinearity implies high correlation between independent variables. High multicollinearity inflates standard error of parameter estimates and makes the interpretation of estimates incorrect.

**Question 8**

Which of the following is an assumption of ANOVA?

A. No correlation between any one observation with another.

B. No correlation between independent and dependent variable

C. No correlation between independent variables

D. High correlation between any one observation with another.

**Answer : A**

**Explanation :**The most important assumption of ANOVA is independent observations. It implies the response value of one observation does not influence the response value of another.

**Question 9**

You have 50 observations in ANOVA and you calculate the residuals. What will they sum to?

A. 50

B. 2500

C. 0

D. -50

**Answer : C**

**Explanation :**The residuals always sum to 0 no matter the number of observations in your dataset.

**Question 10**

If you want to compare the average monthly salary of males and females, which of the following

**two**statistical method should you choose?
A. two sample t-test

B. one sample t-test

C. two way ANOVA

D. one way ANOVA

**Answer : A, D**

**Explanation :**

You can use one-way ANOVA and two-sample t-test because you are comparing two groups, males and females. You can use two-way ANOVA when you have more than one independent variable.

**Question 11**

What values are not affected by oversampling in a rare event model?

A. Predicted Probabilities

B. Intercept

B. Intercept

C. Negative Predicted Value

D. Sensitivity and Specificity

**Answer: D**

**Oversampling does not affect sensitivity or specificity measures. It affects Intercept of a model.**

Explanation :

Explanation :

**Question 12**

An analyst has a sufficient volume of data to perform a 3-way partition of the data into training,

validation, and test sets to perform honest assessment during the model building process.

What is the purpose of the test data set?

A. To provide a unbiased measure of assessment for the final model.

B. To compare models and select and fine-tune the final model.

C. To reduce total sample size to make computations more efficient.

D. To build the predictive models.

A. To provide a unbiased measure of assessment for the final model.

B. To compare models and select and fine-tune the final model.

C. To reduce total sample size to make computations more efficient.

D. To build the predictive models.

**Answer: A**

**Explanation :**The test data set is used to assess model without any biaseness.

**Question 13**

An analyst generates a model using the LOGISTIC procedure. They are now interested in getting

the sensitivity and specificity statistics on a validation data set for a variety of cutoff values.

Which statement and option combination will generate these statistics?

A. Scoredata=valid1 out=roc;

B. Scoredata=valid1 outroc=roc;

C. mode1resp(event= '1') = gender region/outroc=roc;

D. mode1resp(event"1") = gender region/ out=roc;

**Answer: B**

**Explanation:**In PROC LOGISTIC,

**the OUTROC= option tells SAS to generate data for the ROC curve to the SAS data set named**

**roc**.

**Question 14**

Assume a $10 cost for soliciting a non-responder and a $200 profit for soliciting a responder. The logistic regression model gives a probability score named P_R on a SAS data set called VALID. The VALID data set contains the responder variable Purch, a 1/0 variable coded as 1 for responder. Customers will be solicited when their probability score is more than 0.05.

Which SAS program computes the profit for each customer in the data set VALID?

SAS Certified Statistical Business Analyst Questions |

A. Option A

B. Option B

C. Option C

D. Option D

**Answer: A**

**Explanation:**Profit = Revenue - Cost

Question 15

How c statistics is calculated :

A. percent concordant + (1.5* percent tied)

B. percent concordant + (0.5 * percent tied)

C. percent discordant + (0.5 * percent tied)

D. percent discordant + (1.5* percent tied)

**Answer : B**

**Explanation :**c statistics is also called AUC (Area under curve). See the example below -

**SAS Output**

Percent Concordant 82.3

Percent Discordant 17.5

Percent Tied 0.2

c statistics 0.824 =(82.3/100) + (0.5 * (0.2/100))

These questions were very useful. Thank you.

ReplyDeleteGood post. Many thanks

ReplyDeletegood one.. Thank you so much

ReplyDeleteThis is really helpful.I didn't find explanation anywhere.Thanks much buddy!

ReplyDeleteVery informative. Really enjoyed it! Thank you!

ReplyDeleteI never really understand when they attach a director to a project that should be epic whether in action or budget who doesn’t have a ton of experience. china sourcing agent

ReplyDeleteHey what a brilliant post I have come across and believe me I have been searching out for this similar kind of post for past a week and hardly came across this. Thank you very much and will look for more postings from you. auto insurance services in avebury

ReplyDeleteThe following LOGISTIC procedure output analyzes the relationship between a binary response and an ordinal predictor variable, wrist_size Using reference cell coding, the analyst selects Large (L) as the reference level.

ReplyDeleteAnalysis of Maximum Likelihood Estimates

Parameter DF Estimate Standard Error Wald Chi-Square Pr > ChiSq

Intercept 1 -1.0415 0.4749 4.8101 0.0283

Wrist_size M 1 1.1234 0.4989 5.0697 0.0243

Wrist_size S 1 1.6078 0.5478 8.6133 0.0033

What is the estimated log it for a person with large wrist size?

You can use calculator if needed.

Can you explain this?

Thanks

NS Khan, the question is asking for the estimated logit for Large Wrist size, which (as noted) is the reference level. Reference level is the Intercept in the logistic procedure output.

DeleteSo we can find the intercept in the Parameter column, and find it's logit estimated value in the Estimate column; and we find that the answer is -1.0415.

The question is testing:

1.) If you understand that the reference level = the intercept

2.) If you know in which output column to find the estimated logit.

hi. I observe that you’re most likely interested in generating quality backlinks and stuff. I’m promoting scrapebox auto approve link lists. Do you want to trade ? harga saham

ReplyDeleteThis comment has been removed by the author.

ReplyDeletevery informative post, Like it

ReplyDeletedefinitely believe that which you stated Your most wanted justification seemed to be on the internet the easiest thing to be aware of I speak to you, I unquestionably become irked while people consider worries that they simply don’t understand about You managed to hit the nail upon the top along with as well defined out the entire thing without having side-effects , persons know how to take a signal Will likely be back to grow further Thanks answering services

ReplyDeleteThe quickest a business owner can receive the money in their business account is 48 to 72 hours, from the time they submit a complete application. bookkeeping chicago

ReplyDeletewoh I enjoy your articles , saved to bookmarks ! . Crowdfunding Platforms

ReplyDeleteCan I recently say what a relief to seek out someone who really knows what theyre discussing over the internet. You certainly learn how to bring a concern to light and produce it critical. The best way to ought to look at this and fully grasp this side from the story. I cant think youre less popular because you absolutely contain the gift. Short term finance

ReplyDeleteThis comment has been removed by the author.

ReplyDeletegreat resources here. Ill be back for the next your posting. keep writing and happy blogging. sslc result

ReplyDeleteNino Nurmadi

ReplyDeleteService Center Blueberry

Service Center Motorola

Service iPhone

Service Center Apple Bandar Lampung

Service Center iPhone Lampung

Service Center Sanken

Service Center Rinnai

Service Center iphone

This comment has been removed by the author.

ReplyDeleteHello, this weekend is good for me, since this time i am reading this enormous informative article here at my home. Bolt Posts

ReplyDeleteYour content is highly valuable.

ReplyDeleteI wanted to thank you for this great read!! I definitely enjoying every little bit of it I have you bookmarked to check out new stuff you post. What is bitcoin revolution

ReplyDeleteThank you very much for this great post. Bitcoin profit review

ReplyDeleteWhenever I have some free time, I visit blogs to get some useful info. Today, I found your blog with the help of Google. Believe me; I found it one of the most informative blog. as low as 3.95 a month

ReplyDeleteThis particular papers fabulous, and My spouse and i enjoy each of the perform that you have placed into this. I’m sure that you will be making a really useful place. I has been additionally pleased. Good perform! Classified site in Mumbai

ReplyDeleteMake sure that you bookmark at least two of everything, in case the site you use doesn't have anything available for your trip. 출장안마

ReplyDelete